Copyright © 2023 Shanghai Junxun Aviation Technology Co., Ltd.
part number list-shanghai junxun20241014(2)
2026-09-13
| Part Number | Description |
| B32040-37 | TOOL |
| B32043-1 | HANDING TOOL MLG DOOR |
| B32044-12 | PULLER EQPT - STRUCTURAL FUSE PIN |
| B32045-1 | TOOL |
| B32046-1 | PIN ALIGNMENT |
| B32049-1 | TOOL |
| B32049-6 | TOOL |
| B32051-1 | SPRING EXTENDER-LOCK RELEASE ACTUATOR,NG & MG DOOR |
| B32058-27 | ALIGNMENT EQPT |
| B32059-15 | TOOL |
| B32060-1 | TOOL |
| B32068-33 | TOOL |
| B32070-1 | INSTALLATION KIT – BUSHINGS, NOSE LANDING GEAR (NLG) |
| B36001-1 | TOOL |
| B36003-1 | LEVER EQUIPMENT - INS/REM PNEUMATIC DUCT |
| B49001-1 | FRAME ASSY |
| B49001-35 | INSTL/REMOVAL EQPT-APU |
| B49002-64 | STAND ASSY |
| B49003-10 | TOOL |
| B49004-1 | TOOL |
| B49004-7 | TOOL |
| B52001-1 | SLING |
| B52001-2 | BEAM ASSY |
| B52001-7 | CABLE ASSY |
| B52003-15 | Safety barrier-Safety barrier-passenger door |
| B52004-1 | INSTALLATION TOOL – DOOR SEAL |
| B52006-1 | Safety barrier-elec/elex access door |
| B52009-10 | SAFETY PIN ASSY |
| B52013-6 | TOOL |
| B52015-9 | Safety barrier-No.3 emergency exit door |
| B52016-1 | SLING-MAIN CARGO DOOR |
| B52020-3 | TOOL |
| B52021-1 | Wrench-thrust collar |
| B52022-21 | TOOL |
| B54001-30 | TR PUMP ASSY |
| B54001-31 | PUMP ASSY |
| B54001-53 | HYDRAULIC PUMP – ENGINE C-DUCT |
| B54003-8 | TOOL |
| B54006-12 | ALIGN.FIXT. |
| B54012-45 | TOOL |
| B54013-38 | SLING EQPT - DIAGONAL BRACE UNLOAD, PW2000 SERIES ENGINE |
| B54017-22 | SLING EQPT - FUSE PIN, REMOVAL/INSTALLATION - RB211-535 ENGINE |
| B54018-42 | TOOL |
| B55002-15 | SUPPORT EQUIP. |
| B55003-24 | 1/2INCH SQUARE DRIVE RETAINING NUT WRENCH |
| B55003-27 | TOOL |
| B57003-11 | REACTION FITTING |
| B57003-33 | ADAPTER EQPT - TRUNNION BEARING AND MOUNT, MLG INSTL AND REMOVAL |
| B57003-9 | FITTING |
| B71001-130 | TROLLEY |
| B71001-371 | ENGINE HANDLING EQPT |
| B71001-372 | BOOTSTRAP EQPT |
| B71005-10 | PIN&STREAMER ASSY |
| B71005-11 | WRENCH ASSY |
| B71005-28 | Adapter |
| B71005-49 | TOOL SET |
| B71005-51 | TOOL SET |
| B71005-52 | TOOL SET |
| B71005-53 | TOOL SET |
| B71006-79 | Hold open equip-‘C’ duct RB211-535 engine |
| B71007-127 | Cradle-RB211-535 engine |
| B71007-97 | Aft attach ftg assy |
| B71009-9 | LOCK ASSY |
| B71013-1 | Sling-fan cowl,RB211-535 engine |
| B71014-130 | HANDLING FRAME EQUIP |
| B71014-131 | HANDLING FRAME EQUIP |
| B71014-132 | HANDLIN FRAME EQUIP |
| B71014-133 | HANDLIN FRAME EQUIP |
| B71014-3 | HANDLING FRAME EQUIP |
| B71014-5 | FRAME ASSY-C/DUCT |
| B71014-98 | HANDLIN FRAME EQUIP |
| B71016-1 | Hoist/transporter |
| B71020-39 | TOOL |
| B71020-74 | TOOL |
| B71022-172 | TOOL |
| B71022-176 | TOOL |
| B71022-177 | OUTBOARD HQIST ASSEMBLY |
| B71022-179 | TOOL |
| B71023-88 | SLING |
| B71024-18 | 13/16"WRENCH ASSY |
| B71024-26 | 15/16"WRENCH ASSY |
| B71024-36 | TOOL |
| B71024-39 | STRAIGHT EXTENSION ADAPTER |
| B71024-40 | BENT EXTENSION ADAPTER |
| B71025-9 | TOOL |
| B71028-1 | CRADLE ASSY |
| B71029-1 | TOOL |
| B71031-1 | TOOL |
| B71033-21 | CRADLE ASSY |
| B71033-25 | GUARD |
| B71036-1 | TOOL |
| B71040-24 | LIFTING STRAP ASSY |
| B71040-25 | LIFTING STRAP ASSY |
| B71040-28 | TOOL |
| B71040-36 | INLET SLING EQPT |
| B71040-37 | INLET SLING EQPT |
| B71040-38 | INLET SLING EQPT |
| B71040-39 | INLET SLING EQPT |
| B71040-40 | CHAIN HOIST |
| B71040-66 | SLING EQPT-INLET COWL |
| B71042-154 | HANDLING FRAME EQPT |
| B71042-220 | ADAPTER FTG ASSY |
| B71042-229 | E4 POST ATCH ASSY |
| B71042-230 | FWD POST ATCH ASSY |
| B71044-10 | ADAPTER EQPT |
| B71044-28 | ADAPTER EQPT |
| B71044-30 | TORQUE ADAPTER |
| B71046-1 | SLING ASSY |
| B76003-1 | RIGGING EQUIPMENT-ENGINE CONTROL SYSTEM |
| B78001-1 | LOCK ASSY |
| B78001-14 | LOCK ASSY,T/R |
| B78001-2 | DISPATCH KIT |
| B78001-24 | LOCK ASSY |
| B78001-28 | LOCK PIN |
| B78001-31 | CABLE ASSY |
| B78001-43 | LOCK EQPT |
| B78001-8 | LOCK ASSY |
| B78002-36 | SET |
| B78004-1 | TOOL |
| B78006-1 | TOOL |
| B78006-7 | RIGGING BAR – THRUST REVERSER POSITION FEEDBACK LINEAR VARIABLE DISPLACEMENT TRANSDUCER (LVDT) |
| B78008-12 | WRENCH ASSY |
| B78008-17 | SPANNER WRENCH |
| B78008-19 | WRENCH SET |
| B78008-21 | ADAPTER ASSY |
| B78008-5 | WRENCH |
| B78008-6 | WRENCH |
| B78008-7 | WRENCH |
| B78009-26 | LOCK EQUIPMENT – THRUST REVERSER MAINTENANCE |
| B78010-28 | STAND – FUNCTIONAL TEST EQUIPMENT, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR |
| B78011-25 | TORQUE FIXTURE – LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR ASSEMBLY |
| B78013-5 | TOOL |
| B78013-8 | TOOL |
| B78014-37 | TEST FIXTURE – ROD END AND STROKE STOP, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR |
| B78015-14 | TOOL |
| B78015-17 | OVERHAUL SET |
| B78015-18 | DRILL JIG ASSY |
| B78015-23 | OVERHAUL SET |
| B78015-39 | OVERHAUL SET – THRUST REVERSER LOCKING ACTUATOR ASSEMBLY |
| B78016-1 | OVERHAUL SET – THRUST REVERSER LOCKING AND NON-LOCKING ACTUATOR ASSEMBLY |
| B78016-5 | TOOL |
| B78016-6 | TOOL |
| B78016-8 | TOOL |
| B78016-9 | TOOL |
| B78017-1 | INSTALLATION EQUIPMENT – BEARING – LEAD SCREW, THRUST REVERSER NON-LOCKING ACTUATOR ASSEMBLY |
| B78019-1 | TOOL |
| BACP20AU6D | PLUG |
| BC300P | TOOL |
| BC400P | TOOL |
| BC500P | TOOL |
| BLS34529 | ASSEMBLY BULLET |
| C07002-1 | FITTING,JACKING |
| C07002-2 | FITTING ASSY |
| C07004-1 | JACKING PAD |
| C07004-2 | PAD ASSY |
| C07005-1 | FITTING – AIRPLANE TIEDOWN |
| C07007-1 | JACK FITTING |
| C07007-11 | JACKING ADAPTOR |
| C07007-12 | ADAPTER ASSY |
| C07007-14 | BOLT |
| C07007-19 | JACKING ADAPTOR |
| C07007-21 | Bolt |
| C07008-28 | Restraint Equipment - Inboard and Outboard Trailing Edge Flap Tracks ***Recovery*** |
| C07012-1 | SLING EQUIPMENT – AIRCRAFT RECOVERY |
| C07013-83 | SUPPORT - TAIL, AFT FUSELAGE |
| C09002 | DATA SHEET-737 TOWBAR DESIGN |
| C10002-9 | MOORING EQPT-NLG/737NG |
| C10003 | EXHAUST PLUGS – AUXILIARY POWER UNIT |
| C10004-1 | PROTECTIVE COVER – VANE SENSOR, ANGLE-OF-ATTACK |
| C10004-2 | COVER ASSY |
| C10005-1 | PROTECTIVE COVER EQPT - ENGINE INLET ，CFM LEAP - 1 B |
| C10005-23 | TOOL |
| C10006-1 | PLUG EQPT - ENGINE EXHAUST ，CFM LEAP - 1 B |
| C10007-1 | PLUG EQPT - FAN REVERSER |
| C10008-1 | MOORING EQPT - NLG |
| C10008-29 | MOORING EQUIPMENT – NOSE LANDING GEAR |
| C10011-1 | MOORING EQUIPMENT - UNIVERSAL KIT |
| C10011-34 | B747 Anti-typhoon mooring rope |
| C12001-35 | GUARD – INLET, ENGINE RUN-UP |
| C12001-38 | GUARD – INLET, ENGINE RUN-UP |
| C12002-7 | DRAIN HOSE – SURGE TANK SUMP |
| C12003-1 | ADAPTER NOZZLE – RAM AIR INLET MODULATION SHAFT LUBRICATION |
| C12004-6 | SPRING – BALLSCREW LUBRICATION ATTACHMENT |
| C12005-5 | OIL GUN – TRAILING EDGE FLAP ACTUATOR, BALL SCREW, HAND OPERATED |
| C12006-1 | LOCK EQUIPMENT – AILERON FULL-UP LUBRICATION |
| C12006-14 | LOCK EQUIPMENT - AILERON FULL-UP LUBRICATION |
| C1-21870 | POSITIONING ADAPTER |
| C1-21872 | POSITIONING ADAPTER |
| C20002-167 | TOOL |
| C20002-267 | BOOM HOIST-GROUND BASED RMVL |
| C20003-1 | EXTRACTOR - STUCK SCREW |
| C21002-20 | REVERSE FLUSHER EQPT |
| C21002-24 | REVERSE FLUSHER EQPT |
| C21003-133 | BACKFLUSH EQPT - AC |
| C21003-134 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-135 | HOSE EQUIPMENT |
| C21003-136 | Backflush Unit Assy |
| C21003-137 | Backflush Unit Assy |
| C21003-139 | TOOL |
| C21003-155 | BACKFLUSH EQPT-A/C |
| PACK HEAT EXCHANGER | |
| C21003-156 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-160 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-161 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-166 | TOOL |
| C21003-70 | BACKFLUSH EQPT |
| C21003-71 | BACKFLUSH EQPT |
| C21003-72 | BACKFLUSH EQPT |
| C21003-74 | CONTROL ASSY |
| C21003-79 | TOOL |
| C21003-80 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-81 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-87 | Plug Assy |
| C21005-1 | HOIST ADAPTER |
| c21005-62 | HOIST ADAPTER |
| C21005-70 | HOIST ADAPTER |
| C21006-1 | DEACTIVATION TOOL – CHECK VALVE |
| C21006-7 | DEACTIVATION TOOL – CHECK VALVE |
| C21007-74 | DIAGNOSTIC EQUIPMENT – AIR CONDITIONING SYSTEM, MIXED MANIFOLD |
| C21008-1 | EXTENSION CABLE – OUTFLOW VALVE INSTALLATION, AFT FUSELAGE |
| C21009-1 | DISPATCH LINK – SRADA STOWAGE |
| C21010-1 | CLEANING WAND EQPT -HEAT EXCHANGER |
| C21011-1 | ADAPTER – HOSE, EXHAUST |
| C21012-1 | RIGGING CLIP - SRADA EXIT LOUVERS |
| C21888-0-1 | PIN-GROUND SAFETY LOCK |
| C21888-0-2 | PIN-GROUND SAFETY |
| C21949010-1 | R I FRAME |
| C22005-22 | BREAKOUT BOX, MULTIPURPOSE, 100/124 PIN |
| C2-21883 | STRETCHING FIXTURE |
| C22646 | TOOL |
| C22783 | PIN SAFETY LOCK GROUND MLG |
| C23157100-1 | LOCK PIN,SAFETY,GROUND,FOR NOSE LANDING |
| C24002-31 | JACK ADAPTER-VSCF |
| C24002-39 | JACK ADAPTER-VSCF |
| C24002-40 | JACK ADAPTER-IDG |
| C24002-41 | JACK ADAPTER-IDG |
| C24002-45 | JACK ADAPTER-IDG |
| C24002-77 | Jack adapter-vscf&idg |
| C24002-78 | Jack adapter-vscf&idg |
| C24002-80 | JACK ADAPTER ASSY |
| C24003-1 | TRAY ASSY -BATTERY,RMVL & INSTL/737NG |
| C24003-9 | EQUIPMENT |
| C24004-1 | POWER DISTRIBUTION PANEL (PDP)- REMOVAL AND INSTALLATION EQUIPMENT |
| C24004-43 | POWER DISTRIBUTION PANEL (PDP)- REMOVAL AND INSTALLATION EQUIPMENT |
| C25001-1 | WRENCH – ANTI-RATTLE NUT |
| C25002-1 | REMOVAL/INSTALLATION TOOL |
| C25005-1 | PORTABLE CART - GALLEY ASSY |
| C26002-21 | TOOL |
| C26003-1 | NUT DRIVER – LIGHT BASE |
| C26004-101 | Test Equipment - Engine Fire Extinguishing System |
| C26004-32 | TEST EQUIPMENT |
| C26004-33 | TEST EQUIPMENT |
| C26004-73 | TEST EQUIPMENT – ENGINE FIRE EXTINGUISHING SYSTEM |
| C26004-8 | TEST EQUIPMENT |
| C26004-83 | TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM |
| C26004-84 | TEST EQPT - ENGINE FIRE |
| EXTINGUISHING SYSTEM | |
| C26004-9 | PLUG ASSY |
| C26005-1 | Test Box - APU/Engine Fire Detection System |
| C26006-1 | TOOL |
| C26006-29 | TEST BOX |
| C26006-54 | TEST BOX |
| C26006-70 | TEST BOX – CARGO FIRE EXTINGUISHING SYSTEM |
| C26007-4 | ADAPTER CABLE ASSY |
| C26007-72 | TEST EQUIPMENT-COMPARTMENT OVERHEAT DETECTION (M237 IN LINE) |
| C26007-78 | TEST EQUIPMENT |
| C26008-1 | Installation/Removal Equipment - Cargo Fire Extinguisher Bottle |
| C26008-148 | Removal/installation eqpt-cargo firex bottle |
| C26010-1 | COVER - WARNING HORN, APU FIRE DETECTION SYSTEM |
| C26011-1 | Alignment Equipment - Fire Suppression Bottle Nozzle |
| C27001-16 | SPACER ASSY |
| C27001-3 | PIN ASSY |
| C27001-34 | GROUND LOCK SET |
| C27001-41 | SPACER ASSY |
| C27001-42 | SPACER ASSY |
| C27001-43 | RIGGING SPACEER(.163) |
| C27001-51 | GROUND LOCK SET -OUTBOARD SPOILER ACTUATORS |
| C27003-38 | SPREADER ASSY |
| C27007-31 | TESTER SWITCH STABIL |
| C27007-46 | TEST BOX |
| C27008-14 | CONTROL HANDLE LOCKOUT ASSY |
| C27008-15 | CIRCUIT BREAKER LOCKOUT ASSY |
| C27008-22 | FLAP LOCKOUT EQUIPMENT |
| C27012-14 | LOCKOUT SET |
| C27019 | TOOL |
| C27022-1 | CLAMP SET |
| C27025-1 | TORQUE WRENCH EQUIPMENT – RUDDER POWER CONTROL UNIT ATTACHMENT |
| C27026-24 | TEST FIXTURE – BRAKE ASSEMBLY, STABILIZER TRIM ACTUATOR |
| C27028-1 | RIGGING BAR |
| C27028-21 | RIGGING BAR EQPT |
| C27028-41 | RIGGING BAR - ELEVAT |
| C27030-2 | TEST EQUIPMENT-FLAP SCREW BACKLASH |
| C27030-3 | MEASURE ASSY |
| C27030-33 | TEST EQUIPMENT-FLAP SCREW BACKLASH |
| C27030-49 | TEST EQUIPMENT-FLAP SCREW BACKLASH |
| C27030-94 | TEST EQUIPMENT FLAP |
| C27032-1 | MEASUREHENT EQPT |
| C27033-1 | WRENCH – RETAINING NUT, STABILIZER TRIM ACTUATOR |
| C27033-5 | WRENCH – RETAINING NUT, STABILIZER TRIM ACTUATOR |
| C27033-6 | WRENCH – RETAINING NUT, STABILIZER TRIM ACTUATOR |
| C27034-1 | SLING EQPT |
| C27034-31 | SLING EQUIPMENT |
| C27034-45 | fitting assy |
| C27034-51 | TOOL |
| C27035-20 | SLING EQPT |
| C27035-22 | WEB ASSY |
| C27036-1 | SUPPORT SET – FORWARD ELEVATOR CONTROL QUADRANT |
| C27038-6 | LOCKOUT PIN, L.E. CRUISE DEPRESSURIZATION VALVE |
| C27038-7 | TOOL |
| C27039-1 | SPANNER WRENCH – HINGE BEARING, HORIZONTAL STABILIZER |
| C27040-1 | HOIST ADAPTER |
| C27040-29 | HOIST ADAPTER – INSTALLATION/REMOVAL, FLAP TRACK |
| C27041-1 | WRENCH |
| C27042-1 | TORQUE WRENCH EQPT |
| C27044-15 | RIGGING BEAM – ELEVATOR INDEX PLATE INSTALLATION |
| C27045-1 | RIGGING KIT |
| C27045-5 | Preload Shim Assy |
| C27046-1 | LOCK SET |
| C27046-13 | LOCK SET |
| c27046-14 | LOCK ASSY |
| C27046-2 | LOCK ASSY |
| C27046-21 | LOCK SET |
| C27047-19 | LOCK SET |
| C27047-2 | TOOL |
| C27047-21 | TOOL |
| C27047-41 | LOCK SET |
| C27047-42 | LOCK SET |
| C27047-43 | LOCK SET |
| C27047-44 | SHORT LOCK ASSY |
| C27047-45 | LONG LOCK ASSY |
| C27049-36 | REMOVAL/INSTALLATION EQUIPMENT – RUDDER POWER CONTROL UNIT |
| C27050-125 | EQUIP HANDLE JACKSCREW |
| C27050-32 | HANDLING EQPT - JACKSCREW, STABILIZER R/I |
| C27050-5 | BOIST ADAPTER ASSY |
| C27050-82 | HANDLING EQUIPMENT |
| C27050-89 | HALF COLLAR |
| C27051-1 | LOCK SET |
| C27051-2 | LCOK ASSY,FLAP |
| C27051-29 | LOCK SET |
| C27051-3 | LOCK ASSY,SLAT |
| C27051-30 | LOCK ASSY,SLAT |
| C27052-39 | SLING EQUIPMENT – TRAILING EDGE FLAPS |
| C27054-1 | THREAD PROTECTOR SET – HORIZONTAL STABILIZER HINGE PIN |
| C27055-1 | AILERON SLING |
| C27056-35 | SLING EQUIPMENT – LEADING EDGE SLAT, REMOVAL AND INSTALLATION |
| C27057-1 | LOCK |
| C27057-2 | LOCK ASSY |
| C27060-1 | ADAPTER EQUIPMENT - CONTROL WHEELS |
| C27060-22 | ADAPTER ENGINE CONTR |
| C27060-23 | TOOL |
| C27061-1 | ADAPTER – WRENCH, FLIGHT SPOILER ACTUATOR POWER CONTROL UNIT |
| C27064-1 | TORQUE WRENCH ADAPTER – MANUAL STABILIZER TRIM WHEEL |
| C27065-1 | CHECK EQUIPMENT – JACKSCREW BACKLASH, HORIZONTAL STABILIZER |
| C27065-20 | EQUIP JACKSCREW BACKLASH H/S |
| C27066-1 | LOCK EQPT |
| C27069-20 | RIGGING EQPT |
| C27075-1 | SPANNER WRENCH – BRAKE NUT, STABILIZER TRIM ACTUATOR |
| C27075-9 | SPANNER WRENCH – BRAKE NUT, STABILIZER TRIM ACTUATOR |
| C27078-1 | MEASUREMENT TOOL |
| C27080-1 | DRUM WRENCH – STABILIZER TRIM ACTUATOR |
| C27082-1 | FIXTURE EQPT |
| C27082-5 | CONICAL PIN |
| C27083-1 | RIGGING BAR |
| C27083-18 | Rigging Bar - Elevator Tab |
| C27083-2 | RIGGIING BAR ASSY |
| C27084-1 | TEST EQUIPMENT |
| C27085-1 | REMOCAL/INSTALLATION EQPT |
| C27086-1 | SPRING REM/INSTL EQPT |
| C27086-27 | SPRING REM/INSTL EQPT |
| C27090-1 | TORQUE SOCKET – UPPER STOP, STABILIZER TRIM JACK SCREW |
| C27091-1 | Lock Set-Flight Spoiler Actuator |
| C27092-1 | Rigging Beam - Elevator Index Plate Installation |
| C27095-1 | RIGGING LOCK - FOUR DEGREE ，SPEEDBRAKE LEVER |
| C27096-1 | Rigging Tool - Aileron |
| C27097-1 | STRAIGHT EDGE – CONTROL WHEEL |
| C27104-14 | INSPECTION TOOL |
| C27107-1 | LOCK SET - FLIGHT SPOILER ACTUATOR |
| C27107-2 | TOOL |
| C28001-1 | ADAPTER – SUMP DRAIN, CENTER WING TANK |
| C28002-10 | SPANNER ASSY |
| C28002-9 | SPANNER WRENCH |
| C28004-1 | TEST EQUIPMENT-FUEL FEED LINE |
| C28004-22 | PLUG ASSY |
| C28004-24 | GAUGE ASSY |
| C28005-1 | SUMP DRAIN FIXTURE |
| C28008-1 | TEST EQUIPMENT – FUEL TANK AND VENT SYSTEM |
| C28010-1 | PRIMING BOTTLE |
| C28012-1 | TEST ASSEMBLY – FLOAT SWITCH CONDUIT |
| C28013-17 | TOOL |
| C28013-18 | TOOL |
| C28013-19 | TOOL |
| C28013-20 | TOOL |
| C28013-27 | TOOL |
| C28013-28 | TOOL |
| C28013-3 | PROTECTIVE EQUIPMENT |
| C28013-4 | PROTECTIVE EQUIPMENT |
| C28013-6 | PROTECTIVE EQUIPMENT |
| C28013-8 | PROTECTIVE EQUIPMENT |
| C28014-1 | FUEL FEED TEST EQPT |
| C2821-0064W01 | SEAL INSTALLATION TOOL |
| C29002-17 | TST BOX-RUDDER PCU |
| C29003-1 | SEAL INSTALLATION EQUIPMENT – HYDRAULIC SWIVEL ASSEMBLY |
| C29003-8 | SEAL INSTALLATION EQUIPMENT – HYDRAULIC SWIVEL ASSEMBLY |
| C29006-27 | ADAPTER – GROUND SERVICE CONNECTION, HYDRAULIC POWER |
| C29006-28 | TOOL |
| C29006-3 | TOOL |
| C29007-1 | TORQUE TOOL SET – AC MOTOR DRIVEN HYDRAULIC PUMP |
| C29008-1 | SEAL COMPRESSION EQUIPMENT – HYDRAULIC SWIVEL ASSEMBLY |
| C32002-1 | RING COMPRESSOR, NOSE LANDING GEAR INNER CYLINDER |
| C32007-1 | MANDREL – BEARING INSTALLATION, MAIN LANDING GEAR FORWARD TRUNNION |
| C32008-1 | HOLDING FIXTURE – MAIN LANDING GEAR DAMPER ASSEMBLY |
| C32011-10 | SOCKET |
| C32011-7 | SOCKET EQPT |
| C32011-8 | CAP ASSY |
| C32012-12 | Removal Instl Eqpt – Wheel Retention Nut – MLG NLG |
| C32012-13 | MLG SOCKET ASSY |
| C32012-19 | 1/2" -> 3/4" ADAPTER |
| C32012-1922 | TOOL |
| C32012-22 | TOOL |
| C32012-3 | NLG SOCKET |
| C32012-5653 | TOOL |
| C32013-1 | WRENCH ADAPTER ASSY |
| C32013-15 | Torque wrench adapter |
| C32013-16 | TOOL |
| C32013-2 | ADAPTER ASSY |
| C32013-9 | TORQUE WRENCH ADAPTER – AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION |
| C32014-1 | SPRING EXTENDER |
| C32014-2 | EXTENDER ASSY |
| C32014-20 | TOOL |
| C32014-29 | Spring |
| C32015-1 | PULLER EQPT |
| C32015-18 | PULLER EQPT |
| C32015-34 | PULLER-FUSE PIN MLG FORWARD |
| C32016 | REVL/INSTL EQPT-NLG LOWER SEALS |
| C32016-2 | SCRAPER PLUNGER |
| C32016-3 | SCRAPER REDUCER |
| C32016-33 | RMVL/INSTL EQPT |
| C32016-34 | SEAL INSTALLER ASSY |
| C32016-35 | CENTERING ASSY |
| C32016-4 | SCRAPER LETAINER |
| C32016-45 | Dynamic Seal Guide |
| C32016-46 | RMVL/INSTL EQPT |
| C32016-47 | RAM ASSY |
| C32016-48 | Excluder Plunger |
| C32016-5 | SCRAPER LOCK ASSY |
| C32016-66 | RAM ASSY |
| C32017-29 | Dynamic Seal Sleeve |
| C32017-30 | RAM ASSY |
| C32017-46 | Retainer Pin |
| C32017-52 | REPLACEMENT EQPT |
| C32017-53 | <